Firejacket Plenum Conduit

Features & Benefits

Available in white or orange for easy identification.
Rugged corrugated design is flexible, light weight yet provides excellent crush resistance.
Listed to UL Standards 910 and 2024, ideally suited for plenum and riser applications per NEC articles 770 and 800.
Choose from 4 diameters, 1", 1-1/4", 1-1/2" and 2" to accommodate your specific fiber cable diameter.
Sequential footage markings and product identification printed every two feet.
Standard lengths range from 250' coils to 5000' reels.

GENERAL INFORMATION

FireJacket® is ideally suited for use as a nonmetallic flexible raceway for protecting optical fibers in accordance with NEC articles 770 and 800. It has been tested to meet two Underwriters Laboratory requirements, UL-910 and UL-2024.

Also available with Canadian — UL listing (cUL) meeting or exceeding the requirements for FT-6. Please request the Canadian UL listing at the time of quotation and note on the purchase order. This will assure the material is marked appropriately with the cUL designation.

FAST AND EFFICIENT INSTALLATION

The lightweight, flexible design makes it easy to install and maneuver around obstacles that may be encountered in areas requiring plenum. The corrugated wall provides excellent crush resistance for long-term protection while reducing surface contact between the inside wall of the conduit and the cable jacket, helping to lower cable installation friction. FireJacket® is available with 1000# tensile Bull-Line® pull tape pre-installed to help reduce cable installation costs. Other Bull-Line pull strengths are available upon request.

STANDARD REEL & COIL LENGTHS

Non-Standard lengths, special markings and assemblies and other Bull-Line® Pull Tape strengths can be made available upon request (mimimum quantities may apply).

Standard Reel Lengths	Size	Nom OD	Nom ID	Wt. Per 100-Ft.	Footage	Reel F X W	Total Weight
CR 500 075 N633 1000	0.75"	1.04"	0.80"	10.0#	1,000'	36 x 30	250#
CR 500 100 N699 1000	1.00"	1.35"	1.11"	12.0#	1,000'	48 x 44	270#
CR 500 100 N699 2500	1.00"	1.35"	1.11"	12.0#	2,500'	56 x 44	580#
CR 500 100 N699 5000	1.00"	1.35"	1.11"	12.0#	5,000'	72 x 44	915#
CR 500 125 N699 1000	1.25"	1.60"	1.30"	13.5#	1,000'	48 x 44	285#
CR 500 125 N699 2500	1.25"	1.60"	1.30"	13.5#	2,500'	56 x 44	620#
CR 500 125 N699 5000	1.25"	1.60"	1.30"	13.5#	5,000'	72 x 44	990#
CR 500 150 N699 1000	1.50"	1.90"	1.55"	16.2#	1,000'	72 x 44	475#
CR 500 150 N699 2500	1.50"	1.90"	1.55"	16.2#	2,500'	78 x 44	730#
CR 500 200 N699 1000	2.00"	2.38"	2.10"	18.0#	1,000'	72 x 44	495#
CR 500 200 N699 1500	2.00"	2.38"	2.10"	18.0#	1,500'	78 x 44	595#

Standard Coil Lengths	Size	Nom OD	Nom ID	Wt. Per 100-ft.	Footage	Reel F X W	Total Weight
CR 500 100 N699 0250	1.00"	1.35"	1.11"	12.0#	250'	36 x 17	30#
CR 500 100 N699 0500	1.00"	1.35"	1.11"	12.0#	500'	39 x 21	60#
CR 500 125 N699 0250	1.25"	1.60"	1.30"	13.5#	250'	40 x 16	34#
CR 500 125 N699 0500	1.25"	1.60"	1.30"	13.5#	500'	40 x 25	68#
CR 500 150 N699 0250	1.50"	1.90"	1.55"	16.2#	250'	40 x 22	41#
CR 500 150 N699 0500	1.50"	1.90"	1.55"	16.2#	500'	40 x 22	82#
CR 500 200 N699 0250	2.00"	2.38"	2.10"	18.0#	250'	40 x 30	45#
CR 500 200 N699 0500	2.00"	2.38"	2.10"	18.0#	500'	45 x 40	90#

MATERIAL PROPERTIES

STANDARD REEL & COIL LENGTHS
Non-standard lengths, special markings and assemblies and other Bull-Line® strengths can be made available upon request (minimum quantities may apply). Contact your A-D Technologies sales representative regarding your specific requirements.