GENERAL INFORMATION
Minimize your aerial installation and maintenance costs with FlexCor. Strand-Guard Figure-8 is ideal for use in limited access areas such as water crossings, interstate highway crossings or in heavily wooded areas where additional cable protection is necessary. The conduit design permits easy, straight payoff for direct placement onto the pole line and allows greater flexibility for future access to the cable. Standard pole mounting hardware and A-D Technologies' Split-Lock coupler are recommended for quick, airtight installation. No special expansion couplings are necessary, as the corrugated inner liner relieves the mechanical strain caused by extreme temperature changes.
IDEAL FOR AIR-ASSISTED FIBER CABLE INSTALLATIONS
Utilize an airtight conduit system and optimize savings with the use of the AIR-TRAK air-assisted cable placing system. ARNCO´s unique dart method reduces turbulence and permits the installer to take advantage of the lower coefficient of friction offered by less contact between the cable and conduit.
DESIGNED TO RESIST THE ELEMENTS
Strand-Guard was designed to withstand the toughest of environmental conditions. The unique corrugated inner wall combined with a smooth outer wall and high strength web, dissipates the expansion and contraction forces resulting from wide temperature changes. The specially formulated sunlight resistant outer jacket provides UV protection and enough rigidity to protect your fiber for life. The high strength steel strand has a moisture resistant flooding compound.
ASK YOUR SALES REPRESENTATIVE ABOUT OUR FLEXCALC™ PROGRAM
ARNCO FlexCalc software is available for use in estimating key sag values. The program will walk you through a menu of choices culminating in a table of sag and tension values for use in guiding the installer during installation.
