GENERAL DESCRIPTION:
S-60 WTF “Wide Temp Foam” Conduit Foam Sealant is a two-part polyurethane material which rapidly expands to approximately 25 times in volume to form a strong, tough foam. The single cylinder cartridge contains 8 ounces of foam and utilizes any standard caulking gun for dispensing. S-60 WTF was specially developed for the construction, telecommunications, and electrical industries to prevent the intrusion of water and gasses through conduits in manholes, cable vaults, and handholes. It also makes an ideal product for sealing cracks in walls and filling large voids.
S-60 WTF is provided in kit form with all the necessary materials for effective conduit sealing. Each kit contains two cartridges (Parts A and B), static mixing nozzle, damming material and disposable gloves packaged in a clear bag with product instructions. A dispensing gun (available separately) is used to extrude the S-60 material. Partially “gunned” cartridges may be reused by refitting with a new static mixing nozzle.
PACKAGING OPTIONS:
| Part No. |
Description |
Approximate Foam Volume* |
Standard Packaging |
Typical Application |
Order |
| S60 C8 |
6 oz. kit, single cylinder cartridge |
380 cu. in. |
20 kits/case |
up to 5 and 6" conduits " |
|
| S60 FDP |
4 Foam Donut Pack " |
380 cu. in. |
20 kits/case |
Additional 4 foam donuts for damming material
" |
|
| S60 SMP |
Static Mixer Pack |
380 cu. in. |
20 kits/case |
Additional static mixers for mixing material |
|
| S60 2D |
S60 Kit with 2 Donuts |
380 cu. in. |
20 kits/case |
up to 5 and 6" conduits " |
|
| S60 2S |
S60 Kit with 2 Strips |
380 cu. in. |
20 kits/case |
up to 5 and 6" conduits " |
|
| S60 4S |
S60 Kit with 4 Strips |
380 cu. in. |
20 kits/case |
up to 5 and 6" conduits " |
|
| S60 2S 1D |
S60 Kit with 2 Strips, 1 Donut |
380 cu. in. |
20 kits/case |
up to 5 and 6" conduits " |
|
| S60 FSP |
Foam Strip Master Pack |
380 cu. in. |
48 strips/case |
Additional strips for damming |
|
| RPG Gum |
Heavy Duty Gun for S 60 single cylinder foam |
|
*Foam volumes are approximate and can vary, depending on the temperature of materials and substrates at the time of mixing. Please inquire
about other packaging options.
APPLICATION
S-60 WTF is safe for use with PVC or Polyethylene and will not harm cable jackets. Once S-60 WTF is expunged from the cartridge the hardening process will begin immediately and set in 1-2 minutes (hardening is a function of temperature and set times may vary). Surface hardness will develop in approximately 10 to 30 minutes. The hardening process can tolerate a small amount of moisture, however copious amounts could inhibit final outcome.
STORAGE
It is not recommended to store S-60 WTF at extreme temperatures (in excess of 100°F or below 20°F). The shelf life of S-60 WTF in an unopened bag at a storage temperature below 100°F is 12 months. Storage above 100°F may alter the expansion ratio of the product.
SAFETY
The uncured components of S-60 WTF can cause irritation to eyes, skin and mucous membranes, and are harmful if swallowed. When handling, avoid all contact with eyes, skin and clothing.Wear protective gloves (supplied with each kit) and safety glasses. In case of skin contact, promptly wipe off excess, then wash with soap and water. For eye contact, flush eyes with plenty of water for at least 15 minutes, and then obtain medical attention. Always wash hands before eating or smoking. Obtain immediate medical attention in case of ingestion. (Do not induce vomiting!) S-60 WTF Conduit Foam Sealant contains isocyanates (MDI) which may cause allergic skin or respiratory reaction. Although MDI is extremely low in volatility, an inhalation hazard can exist from MDI vapors formed during heating, foaming or spraying. Use this product with adequate ventilation. Consult the S-60 WTF Conduit Foam Sealant (Parts A and B) Material Safety Data Sheets (MSDS) for additional health and safety information.
WARRANTY STATEMENT
Seller’s liability (whether under the theories of breach of contract or warranty, negligence, or strict liability) for its goods shall be limited to replacing such quantity of this product proven to be defective or, at A-D Technologies' option, to refund the purchase price of such product. IN NO EVENT SHALL A-D TECHNOLOGIES BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THIS PRODUCT. A-D TECHNOLOGIES SPECIFICALLY DISCLAIMS ANY WARRANTY, EXPRESSED OR IMPLIED INCLUDING ANY WARRANTY OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE. A-D technologies shall not be liable for any loss, injury, or damage, direct or indirect, arising from the use or the failure to properly use this product. The user assumes all risk and liability in connection with this product.
|